I made an acrylic light mobile based off the ancient geoglyph land etchings in Peru called “Nazca”.
I did a test on the cardboard for one shape on the 75w printer, but regret not doing the whole actual size because I confused the sizing when I switched it over to the bedding size file. This cut off the ends of the 2 birds’ tails.
I had the settings at 18″ acrylic but for some reason it took 4 passes to finally cut through.
I did the base on the 50w machine and didn’t have any problems.
I tied the nazca line shapes to the top with clear fishing wire.